Take Your First Steps with Roversa

Just built or unboxed your Roversa? Let’s get it moving! Follow these simple steps to prepare your robot and create your first program, no computer or coding experience needed.

Three Roversas seen from above drive and turn on a wooden table, their micro:bit displays lit

Power Up

Make sure your Roversa is charged, the micro:bit is inserted with the LEDs facing up, and the power switch is on.

Not sure about charging or what the status lights mean?

Get Ready to Roll

Every time you turn on Roversa, it needs to initialize its sensors to establish its starting position and orientation. When FLOOR + PLAY scrolls across the micro:bit display, place Roversa on the surface where you’ll use it and press the green Play button.

Not seeing FLOOR + PLAY?

Take Your First Steps!

Use the directional buttons to create a sequence of movements, then press Play to watch Roversa follow your instructions.

After Roversa finishes running your program, it automatically clears the instructions so you’re ready to create a new one!

Keep Roversa Running Smoothly

Every robot moves a little differently. These resources will help you adjust Roversa’s movement, stay current with updates, and understand what your robot is telling you.

Calibration

Fine-tune how Roversa moves, turns, and travels across a grid.

Calibration Wizard MakeCode Calibration

Firmware

Find the latest Standalone firmware and learn how to install it.

Firmware Guide

LED Symbols

Learn what the symbols on Roversa’s micro:bit display mean.

LED Symbols Guide

Language Settings

Explore Roversa’s English and Spanish language options.

Multilingual Guide